Midmark Ritter M11 Steam Sterilizer
Features include: Steam–flush pressure pulse air removal system with four pre-programmed and two programmable cycles
The M11 Steam Sterilizer is designed to be safe, reliable and easy to use. With one of the largest chambers of any tabletop autoclave on the market, the M11 can optimize your supply of available sterile instruments by reducing the time and effort required for sterilization.
Reliable:Steam-flush pressure pulse air removal system ensures proper steam sterilization.
Easy to Use:Pre-programmed sterilization cycles and intuitive LCD display with prompts ensure quick, confident operation.
Safe:Real-time alerts notify users promptly of any critical system errors.
Features:
- Low water indicator light tells you when the reservoir level is too low
- A door-ajar light tells you if the door is not securely closed
- LED display shows the units temperature during heat-up and time remaining during cycles
- Lights turn on progressively during filling, heating, sterilizing, drying and complete stages
- Easy to fill and to drain water - located at the front of the machine
- A large capacity water reservoir means you fill it less often
- Four stainless steel trays come with the unit (two large, two small)
- Easy-to-read pressure gauge and electronic controls offer simple operation and reduce down time
Use on a level, water-resistant material such as laminate, stainless-steel or stone surface. Allow 2.0" (5.08 cm) on sides and rear, and 5" (12.7 cm) above to allow space to fill reservoir and change the printer paper roll.
Safety Standards:- UL listed to US and Canada standards
- UL 61010-1, 2nd edition
- IEC 61010-2-040, 1st edition
- CAN/CSA C22.2 No. 61010-1, 2nd edition
- CSA C22.2 No. 61010-2-040-07, Part 2-040, 1st edition
- Meets the requirements of ASME Boiler and Pressure Vessel Code.
- A separate (dedicated) circuit is recommended for this sterilizer.
- IEC 60601-1-2 Edition 4.0 2014-02
- CISPR II:2009, A1:2010 Class A, Group 1
- IEC 61000-3-2:2014, Part 3-2
- IEC 61000-3-3:2014, Part 3-3
- ANSI/AAMI ST55:2010(R)2014
- ANSI/AAMI/IEC 62304
Discontinued | No |
---|---|
Additional Specifications: |
|